Turbine Flow Meter – Liquid Control

Liquid Control Turbine Flow Meter IT400

 

Specifications :

TOTAL

  • 8 digit 5.40 mm high LCD (continuous display)
  • Batch total: 8 Digit LCD (external reset—magnetic)
  • Grand total: 8 Digit LCD (no reset)

RATE

  • 5 digit 8.66 mm high LCD (continuous display)
  • Range over/under limit indication
  • Refresh rate: multiple depending on power mode (16/s, 8/s, 4/s, 1/s, 0.5/s) Accuracy Display: ±0.01% reading (rate) or ±1 count (total) Analog output: ±0.025% of full scale @ 20° C Digital output: ±1 count
  • Enclosure: Explosion Proof Aluminum
  • Input Power: 5 to 48 VDC, Reverse Polarity Protected
  • Internal Power: D Lithium Battery
  • Temperature Rating: Operating: -22° to 167° F (-30° to 75ºC)
    Storage: -40° to 185° F (-40° to 85° C)
    Enclosure: Explosion Proof Aluminum
  • Serial Communications: RS-232 (optional)
  • Signal Input: Magnetic, RF Modulated (external power required), Pulse
  • Temperature Compensation: Two Wire RTD (optional)
  • Outputs: Scaled Pulse, Rate (4-20 mA), Alarm (optional)
  • Approvals: NMI approved, meets all Handbook 44 requirements for cryogenics
    Form C, 30A Relay, RS-232